Lubsur
®
Products
Industrial Products
|
Lubsur
®
701
|
Lubsur
®
719
|
Lubsur
®
728
|
|
Lubsur
®
701 a lead free anti seize compound, made from high
quality mineral oils, bentonite (clay) thickener and fine
copper powder. Anti-seize properties enable this grease to
work even if the joints become so compressed that most of the
compound is squeezed out, or excessive temperature flashes off
the oily part of the compound. A fine film of copper particles
always remain in joints or threads to prevent seizure. In the
case of threaded joints where the compound has been applied
before mating, these can easily be broken again, even after
long periods of use. Will also prevent seizure of pins or
shackles exposed to harsh conditions, where limited movement
and long idle periods, are a problem for lubrication.
Service range:
-30°C to 1200°C
Packaging:
Available in pails, kegs, drums, cans, bins, cartridges and tubes.
|
Lubsur
®
719 is a premium quality, water resistant grease for
use in industrial and marine applications where the presence
of water and humid atmospheres can effect lubricating
performance and be detrimental to the protection of parts from
corrosion.
Lubsur
®
719 is further enhanced with a special additive which
provides additional protection and lubrication in areas where
excessive levels of water are prevalent such as water pumping
equipment.
Lubsur
®
719 is suitable for plain and anti-friction bearings.
Service range:
-17°C to 150°C
Packaging: Available in pails, kegs,
drums.
|
Lubsur
®
728 is a premium quality non-melting grease for use in
plain and anti-friction bearings subjected to elevated
temperatures. The consistency of the grease remains stable
throughout a wide temperature range.
Service range:
-17°C to 170°C
Packaging: Available in pails, kegs,
drums.
|
  
|
|
|
|
Lubsur
®
737
|
Lubsur
®
746 |
Lubsur
®
755
|
|
Lubsur
®
737 is a premium quality fully synthetic semi-fluid
grease recommended for use in worm reduction units subjected
to high loads.
Lubsur
®
737 imparts a low coefficient of friction and hence
transmits the maximum power with the minimum temperature rise.
Service range:
-26°C to 150°C
Packaging:
Available in pails, kegs, drums, cans, bins, cartridges and tubes.
|
Lubsur
®
746 is a unique lithium complex grease containing a
blend of extreme pressure, anti-wear and corrosion additives,
developed for use on steel mill roller table motors and also
bearings found in high temperature over fans, paper mills and
cannery equipment FEATURES: Excellent thermal and mechanical
stability and oxidation resistance, Good water resistance,
Good pumpability.
Service range:
-17°C to 170°C
Packaging: Available in pails, kegs,
drums.
|
Lubsur
®
755 an aluminium complex grease specifically
formulated for use on open gears. This product has high load
carrying and adhesive characteristics, which not only allow it
to be used on gears with circumferential speeds in excess of
20m/sec., but also where exceptionally high loads and slow
sliding speeds are encountered. It is free of bitumen,
solvents and other components, which are hazardous to health
and will not clog the spray nozzle of either manual
applicators or integral automatic systems.
Lubsur
®
755 provides excellent corrosion protection even at
the low application rates, which are normally associated with
this grade.
Service range:
-8°C to 260°C
Packaging: Available in pails, kegs,
drums.
|
|
|
|
|
|
info@lubsur.com
